Siemens S7-200PLC Ethernet adapter, is used for the communication between Siemens S7-200PLC and Ethernet, Internet or 3G wireless network by the programming interface (RS485 interface) of S7-200 PLC. No need to revise the communication protocol and software,support Dynamic DNS,user can remote control the PLC by the internet. The RJ45 port,RS485 interface and power supply port are all isolated in order to suit harsh environment in the industrial scene.
ES-ETH-PPI is the industrial product which use the Ethernet and Internet or 3G wirelss network to achieve Siemens S7-200PLC networking communication. It integrates many complex network protocols, support TCP Server,TCP Client,UDP Unicast,UDP Multicast etc many modes.It has 10M/100M adaptive Ethernet interface and 10-bit and 11-bit RS485 interface which meets Siemens technical specifications.You only need to go on simple setting and then let the S7-200PLC go on network communication.
The RJ45 port,RS485 interface and power supply port are all isolated in order to suit harsh environment in the industrial situations. Especially the isolated power supply port and each signal pin has anti-static protection and surge protection which can solve the communication port easily damaged problem for Siemens S7-200PLC.
Notice: When ES-ETH-PPI is used to communicate between PC and S7-200 PLC,you need to set the local connection as “Modem connection” in the STEP7 Micro/WIN software.When it’s used to communicate between PLC and PLC,you only can use the free port RS485 communication mode,can’t use Siemens PPI,multi-master PPI or advanced PPI protocol,also MPI and profibus protocol.
◆ High-speed, reliable industry standard, anti-interference design suit for the harsh electromagnetic environment
◆32 bit RISC (NP7 series) ARM7TDMI 55DMIPS
◆ 128KB SRAM，128KB Code + 32KB Boot
◆10M/100M adaptive Ethernet interface
◆Support Siemens technical specifications 10-bit and 11-bit RS485 communication mode
◆Support RS485 data bits 5，6，7，8 settable
◆Support RS485 stop bit 1，1.5，2 settable
◆Support RS485 Parity NONE,ODD,EVEN,MARK,SPACE settable
◆Support RS485 baud rate 110～115200bps standard baud rate settable,not support 187.5Kbps baud rate
◆Support PPI communication of RF modem and free port RS485 communication, not support advanced PPI and multi-master PPI protocol
◆Support Dynamic DNS
◆Working mode can be chose TCP Server、TCP Client、UDP multicast and UDP unicast.
◆Built-in Flash memory, can save the setted parameters
◆Support Windows 95/98/ME/NT/2000/XP/2003/XP/Vista/Win7
◆RJ45 port 1500VDC electromagnetic isolated, RS485 interface 1000VDC electromagnetic isolated, power supply 1000VDC electromagnetic isolated
◆Interface protection: power supply port has the reverse polarity protection and over current protection,RS485 interface has the 500W anti-lightning surge protection and overcurrent protection; all pins and terminals have anti-static protection
◆24V±10% DC power supply from PLC RS485 socket,1W power
◆Dimension: 65mm×51mm×26mm, 35mm standard rail installation
◆Temperature: -40°C to +80°C (-40°F to 176°F)，5% to 95% RH
1. ES-ETH-PPI 1PC
2. RJ45 Cable 1 PC,2 M
3. CD 1PC