Phần mềm SIEMENS SIMATIC STEP 7 v5.5 (x32 + x64) các Version với Utorrent

[tran_hieu0983]

Mục này mở ra với mục đích là để chia sẻ các phần mềm TĐH đuôi utorrent cho toàn bộ member. Các bạn chú ý trong các mục như thế này chỉ post bài có đính kèm file utorrent liên quan tới những version của các phần mềm liên quan. Nếu các bạn thấy hữu ích thì nhấn thank là được rồi không cần comment. Lời comment hay nhất cho những bài viết hay là thank hoặc post thêm link utorrent là thực sự có ý nghĩa.

SIEMENS SIMATIC STEP 7 v5.5 SP1 + PLCSIM v5.4 SP5 (x32 + x64)

SIEMENS SIMATIC STEP 7 v5.5 SP2 (x32 + x64)

With its vast array of easy-to-use functions, the STEP 7 software significantly boosts efficiency in all of your automation tasks. Whether for configuring hardware, establishing communications, programming, testing, commissioning and service, documentation and archiving, or operational and/or diagnostic functions, the software sets the benchmark in its field.
About Siemens AG

Siemens AG is a German engineering conglomerate, the largest of its kind in Europe. Siemens has international headquarters located in Berlin, Munich and Erlangen. The company has three main business sectors: Industry, Energy, and Healthcare; with a total of 15 divisions.
Worldwide, Siemens and its subsidiaries employ approximately 420,800 people in nearly 190 countries and reported global revenue of 76.651 billion euros for the year of 2009. Siemens AG is listed on the Frankfurt Stock Exchange, and has been listed on the New York Stock Exchange since March 12, 2001.

About Siemens Simatic Step

SIMATIC is the name of an automation system which was developed by the German company Siemens. The automation system controls machines used for industrial production. This system makes it possible for machines to run automatically. Depending on the needed function of the machine you have to upload the right program on your Simatic unit. This unit is kept in a control cabinet near the machine.

Function

Simatic is similar to a digital computer which can store and run programs. The Simatic also has some inputs and outputs. The running program on the Simatic controls these inputs and outputs. Both are connected by electrical wires with the machine. That makes a communication between the Simatic and any machine possible. As the case may be the inputs and outputs are set on a ?High? signal or on a ?Low? signal by the program. These are different electrical definitions. Finally these signals are important if an action in the machine happens or not.

About Simatic S7-PLCSIM

Simulation systems provide effective support with the development of programs and the following actual application. In the automation environment, a simulated test environment including PLC and process reduces startup times and thus costs, for example. Early discovery of programming errors and optimization of program sections enable the optimized and errorfree use of the programs in the actual system. If a program is modified, it can be tested prior to loading it onto the plant control system.